2EZ-Bridge Wireless Bridge, 5ghz, 3KM range, with DC 48V POE support and easy to use dip switch quick setup
Point to Point (PTP) and PTMP (point to multiple point) supported.
No PC/Laptop needed for operation.
No technical settings.
No professional guidance.
Just provide POE from any 48v DC POE switch, and change dipswitch patterns to achieve wireless communications.
The 2EZ-BRIDGE are specialized for CCTV Video Transmission compared to other AP brands applicable for NETWORK Transmission only.
The 2EZ-BRIDGE can transmit from Short Distance up to 3KM (1.86 miles) Long Distance Video Transmission utilizing a stable 5.8ghz bandwidth
2 x LAN ports
Atheros AR9344 600MHz Chipset inside
Operating temps: -30～65°C
WEP 64/128bits,WPA,WPA2,802.1x encryption
All mounting hardware is included as well an 48V DC POE injector. Optionally, you can purchase a 2EZ-POE Outdoor rated POE switch to power these units and support IP cameras for a very professional and clean installation. View 2EZ-POE here
View Specification sheet here
"I was getting frustrated with the old set up. I put these bridges up. Got on my phone, and everything popped right up!"
Installation Note: The dip switches change the IP address of the point, you want different IP addresses for each new point that you add into the system.
The first dip switch goes into the up position if its located on a building with internet and the ethernet wire goes into the yellow port.
The first switch goes into the down position at locations which do not have internet and the ethernet goes into the black port.
Keep it simple! Use the last 2 switches to change the IP address so that each device has a unique address and all other dip switches in the up position.
Please note: these do not pass DHCP addressing from the router, unless compatible router is installed. Therefore you must set all devices to a proper static IP address.